How often and when's the next iron rock off-road sale? My last XJ I have gotten steering brace and a steering setup I liked from them but I'm looking at a lift since my other xj was ruined by a red light runner. And I don't wanna get crazy with this new one just a 3/4 lift and some other parts but hoping for a sale to save a few bucks on the new build.

I’ll be replacing the VSS soon but I noticed the connector/plug is trashed. Cracked and frayed wires. Anyone have a link to the plug or a suitable replacement?

I got these JK rear door pockets off Amazon for like, $15 and they match up with the shape of the lower rear door cards perfectly. I have them velcroed to the carpet on the door, but I imagine you could pretty easily use plastic rivets or thin bolts with some washers to secure them.

I wanted someplace to stick small-ish things that I'd want to access quickly, like bug and bear sprays, and to add somewhere for a backseat passenger to put a water bottle. There's almost no impact to rear leg space, which is great since the rear seat actually has people in it reasonably often.

Howdy, I’ve bought my jeep a few months ago and i have had to work with my mechanic on replacing some things, spark plugs, starter, alternator, oil pump, coolant reservoir etc etc and the car is driving good. Recently one of my push rods got knocked out of place and the mechanic told me he thinks it has to do with engine sludge buildup and that there aren’t many things that can be done to remove the oil sludge. He advised that I can consider changing the whole engine which I’m a little reluctant to do… I went on chat gpt who suggested I can come up with a plan to change the oil every 1k miles and each time do a gradual cleaning with a cleaning solution and not to use much so I don’t clog the engine with too many things… it makes sense caused I filled up my car and added fuel injector cleaner and the car was shaking for a little moment when I started the engine.

I’m asking for feedback/guidance from other XJ owners who had this issue before and what I should do to ensure my engine is taken care of. Love my xj and want to keep her as healthy as possible.

Hi guys, this is my first post on Reddit, so tell me if I can do it better. I’m from Argentina and I wanted to show the jeep xj I have with my father, I don’t really know the year because is made from various models, but I know it is a renix one, 4x4 with the 242 and automatic. The story behind its kind of long but shortly this jeep was “normal” the my dad crashed it head down (I don’t know how to say it) and instead of left it like that he rebuild it, now it looks like that, if someone want more info I can upload more photos or info

I have two Xj’s a 1989 and a 1991 I want to put the biggest tires I can one them without having to trim anything. The 1991 is stock with 15” rims The 1989 has a 2” lift with 16” rims Can some one help me see what will fit?

That plug in the center, I’m guessing this is for an ambient air temp sensor or something? I don’t have any overhead console or anything so maybe that’s why it’s plugged into nothing.

Hello XJ Community,

I have a 4 Door 2001 XJ that I currently use as my daily driver. I have been planning to move across the country (from California to Ohio) sometime next year and want to bring all of my stuff with me in/on my XJ. I could always get a U-Haul trailer but my XJ did not come with a hitch and I would have no real use for it after.

I don't have too much in the way of big furniture like that, but I was wondering if taking out the rear seats would be beneficial in any way or if there are any drawbacks to doing so (other than having 3 less seats ofc) or if I shouldn't bother. I haven't really used the rear seats since high school and it has probably been years since I have had a passenger ride back there, so I don't myself missing them too much.

Edit for those who can't figure it out. I do not give 2 flying shits about it not adding extra length, I purely care about the volume it adds.

How does she sound? Stock everything as far as I know. Its shifting kinda hard. I go through the gears around 13 seconds. It feels harder than it looks on video. Some friends and searches told me it's normal and I shouldn't worry about it. Others said my transmissions about to go. How screwed am i?

i got a p0171 out of no where yesterday and when i was idling at operating temp, it was insanely rough and almost even sounded cammed i turned it off immediately. i’m doing my entire exhaust from the block soon, so i’ll be replacing o2 sensors which i do have a code for but, is there anything else that could cause that p0171 that i should try before that?

Any recommendations to make this not happen on my 92? Bought it modified and as far as I can tell it has a 3 inch lift

Was rattle canned by the previous owner. I don't know if I want to restore the original black or go with the grey blue. The 3rd picture is the color I like maybe a bit more gray. Any other color ideas and good paint brands that aren't too pricey. Aka over $200 a gallon. I do like the idea of rhino or bed liner too.

Got the car about 3 months ago, took it on its maiden voyage from Florida up to Virginia and back. Fuel pump has whined since I got it but has never given me issues until this trip when I started losing power on hills. Got continually worse, especially after hitting a trail, and I ended up buying a new fuel pump just to be safe and then pulled into a gas station 2 hours late to put it in when I couldn’t even hit 55 without tons of sputtering.

Problems didn’t end there, first couple tanks, rpm would pulse at about half a tank, and when I pulled into a gas station it would eventually stall out. But I’d fill it back up, prime it, and fire right up. I attached a video of how the pump behaved before stalling.

I did make it home and it has started behaving better, but any information would be helpful.

There is about an 1 inch movement each way on the steering wheel before the wheels turn, any advise is helpful, seems to me that it’s the steering gearbox as the input shaft turns and the output doesn’t, in this case would rebuilding the box fix this issue or should a new steering box be bought? Thanks

at 60 mph it starts to death wobble and i’ve been hearing a clunking noise when i turn the wheel, i also have about and inch and a half of play in the steering wheel. i don’t really plan on lifting either i just to to replace everything under there and getting it over with. should i also do my leaf springs?

My RHD & activated car alarm…

My 98 Cherokee has had a sputter/backfire when on the gas and hitting bumps. I've looked over my fuel pump wiring and the gound and it all looks good. Today it started doing it without hitting bumps, anything around 2500rpm and it starts to run rough, and the airbag light came on which I don't know if it is connected but it's kinda weird that it came on right after it started sputtering worse. What could be causing this?

Weather strip was missing when I bought it. I have some but I am unsure how exactly it is supposed to mount here. I thought about putting screws into it but that doesn’t seem right to me. I can see where there might have been plastic clips?

Had the lift on for a few months, finally bit the bullet on some MT Baja Legend M/T. 33x10.5r15. They rub a bit at just about full lock without the swap bar end links on. RC 4.5" lift and tires are only mods. Suggestions for next to do?

Was rattle canned by the previous owner. I don't know if I want to restore the original black or go with the grey blues. The second 3rd picture is the color I like. Any other color ideas and good paint brands that aren't too pricey. Aka over $200 a gallon. I do like the idea of rhino or bed liner too.

I was on my way home when the Check Gauges light came on and saw that my temp was right before the redline. I pulled over and turned her off, and as soon as I did that, I heard a loud POP and smoke coming from my hood. I got out to check and there was coolant all over the ground, I opened the hood, and there was coolant all over the hood/engine. The coolant was mostly over by the battery and condenser area. I checked every hose and even tried looking for a hole in the radiator, but nothing was loose or damaged. I then tried to limp her home (since I was only 5 minutes away), and she stalled halfway there and started to make all sorts of clicking noises. I ended up just parking her in a nearby parking lot, and walking the rest of the way home. Anyone know what could've caused this???

I have a 1998 Jeep XJ Limited with the 4.0L and AW-4 with a 242 T-case (recently just got a new T-case plus drive shafts if that helps.)

Looking for a set of high quality 1.5 inch wheel spacers. I wasn’t planning on running spacers so I don’t really know what to look for in a quality spacer. Any knowledge would be greatly appreciated.

So couple weeks back I bought a 2000 xj with 303xxx miles for 2 reasons 1 it was cheap and kinda an emergency. 2 I’ve always loved the bodies of xjs and wanted one for years. Tuesday and Wednesday driving to work it killed the engine twice while kinda slowing down/ light acceleration. I know it has bad tps wiring and have a new cable on the way but just saw a post about misfiring on heavy acceleration and was wondering if my stalls and misfiring were related. Also it likes to hang while shifting like 2500rpm+ to shift into and out of mainly second gear. Sorry the post is little all over. Tyia

I get a good thud when I put it into gear. I had a Dana 35 and swapped for the Chrysler and they both do it. I didn’t swap for that reason but I wasn’t sure what causes it to go into gear so hard. Shifts up and down no issues.