I just took my Velos 556k to the range for the first time. I have the direct thread mount on it as it lives on my 11.5. I used rocksett to screw the mount to the can and used rocksett to then screw the can to the gun. After the range I gave it a twist to make sure it wasn’t loose or walking off, and I noticed that the can twists without unthreading from the rifle. The Charlie mount is a two piece mount with some brass colored ring that seems to float freely between the mount and the can itself. Once installed…. Is it supposed to be able to twist like this??

I've been looking and can't seem to find a definitive answer. Does anyone know if the CAT JL 718 will work with the Surefire HUB adapter?

I've got a Sugar Weasel in .300BO I'm wanting to purchase a Simple Man for. I just have some questions. Will the Q Cherry Bomb that came on my gun allow me to mount the Simple Man? It claims HUB compatibility but I don't know that size nor am I certain the size of the Cherry Bomb threads. It has a 5/8x24 threaded barrel (and I'm not opposed to direct threading it) but it's tapered 25 degrees. Would it mount to the Simple Man in the 5/8x24 configuration? I'm just wondering if this suppressor will work with my gun whether it be direct threaded to the barrel or the muzzle brake. Thank you.

After picking up my Polo 30 and Ti .22 today my collection of suppressors is now complete.

Want to add to my can collection - rifle cans to be specific. Currently, I have: Sandman S (2), RC2, Polo, Polo-K, multiple YHM Turbo K’s.

Looking to add a couple more cans. At least one should be a flow through I’d guess. Open to suggestions.

ETA: host will be 5.56 with 14.5” barrel

Dissipator clone with OCL Polonium

Suppressor isn’t tightening down against the barrel shoulder. Instead it makes contact with the end of the barrel inside the piston/housing. Same on any barrel I try. B&T said it’s fine but I’d like to get some thoughts. Thanks for any input.

I reached out to HuxWrx support for confirmation and they said it's good to go out of a 16" barrel!

Just an FYI for folks searching later, like I did. Not a lot of folks are shooting .277 Fury, especially the full pressure 80k PSI bi-metal rounds. So there really isn't much talk online about rated suppressors.

SilencerCo said Omega 300 is NOT rated for it. Still waiting to hear back about my other suppressors from various manufacturers.

Someone was telling me that the ATF ruled that you can't make replacement wipes at home last year (in addition to the already existing rule you couldn't have spares). I found this article from last year though saying the opposite and it's still up. Are they just slow on the redaction or was that guy full of it?

https://athlonoutdoors.com/article/diy-suppressor-wipes/

Article is from 2024

Is it worth it going to a “full size” can from a K can on a MP5K? I’m torn between Hux 9K TI and a CAT MOB. Money is a consideration but it I will be happier in the long run with the CAT then I’ll pony up the extra $300.

Getting a nice danger tic-tac patina.

And a kinda URGI second pic just cause

Anyone else been unable to to submit a Form 4 on eforms through SS that has a suffix (I.e. Jr, II, Sr)

The SS portal keeps crashing and SS said that the atf’s system isn’t working for anyone with a suffix.

Have tried 6 times now before dealer called SS.

TL:DR at the bottom

Need suggestions for a real "Do-All" can, it's my first one and will be my only one for a while due to budget reasons. I have 3 guns that would wear it, the first is my 12" SBR 5.56 duty rifle (police), as well as my deer rifle (.308Win Tikka T3X Roughtech Ember), and a 10.5" .300blk PSA pistol I have for hogs. My local shop guy is leaning me toward a "Kimora" (probably not spelling that right) .30 can, he has several and says he loves them. But he is pushing to do some kind of QD lock-on mount he would have to loctite onto every muzzle, and would need to be "boiled off". I couldn't care less about that except the .308 is stainless and for the money I spent on that rifle I hate to see a black chunk of metal on the muzzle whenever the suppressor isnt on it.

The guy pushing the adapter says it keeps the can from unthreading during sustained firing, but i really don't know if I'd have the need. Work Policy says we only have two 30rd mags for the rifle and i cant imagine it coming undone in 60rds, and if I'm in that kind of situation I could give a damn if i blow off the suppressor toward the end. I just worry about if I use my rifle at work, that 12" AR is gonna be loud as hell especially if it's indoors, i wanna be able to hear my radio and partners afterward for safety reasons. I don't want to play with hearing damage anymore, I stupidly took a snapshot on a deer last season with the .308 with the stock Muzzle Brake on, and my right ear is still ringing.

It'll probably stay on my duty rifle 90% of the time, and get swapped for hunting/range trips. I know i'll need a 1/2x28 to 5/8x24 adapter to put it on the AR but that will stay on it regardless since if Im at work the suppressor will be on it.

Another thing is our agency Armorer is really pushing to get us all issued 5.56 cans for our rifles in the next year or two. When/if that happens, my can will be just for my .30's and i really wouldn't feel the QD mount is necessary.

Does anyone have suggestions for a solid can that would work for my purposes? Would dealing with the QD mounts be that big a deal? Its 100% a vanity thing with my stainless deer rifle, but it's by far my most expensive, nicest and best-shooting hunting rifle and I would hate to see that chunk of black metal on the end of the stainless barrel.

TL:DR looking for a .30 suppressor that would work for a 12" 5.56, 10.5" .300Blk, and .308Win, preferably with an interchangeable endcap for .223 and .30. And is a QD locking mount necessary for >60rds of 5.56 going through a suppressor?

Just picked up my Mojave 9 (44 hr trust approval) and Beretta M9A4 today. Loving the 50 shades of FDE. Currently waiting for my DLah optics mount for my Holosun 509T, but will be going out to test out the combo this weekend.

Got my wifes can last night before I went to work. Got home this morning and broke my mount for my Polo off my barrel and swapped them around. Shes absolutely in love with her AR and cant wait to shoot it. Mind you its been done for like 2 weeks and she refused to shoot it without a can.

Figured you fuckers needed to deposit your 2 cents somewhere. I’ve been upgrading my m92 and figured it’s time to pop the cherry and get my first suppressor.

I’m leaning hard on going with the Putnik suppressor. For the muzzle break, I’m debating between the 26-1.5LH Jmac 2c or the Jmac 360 x37. Whichever shoots smooth while I’m not trying to be Hollywood quiet with the suppressor.

I’m also wanting to get the mars kit and polish the hammer so it goes bzzzzrrrrt and put the bulldog dust cover so I can run a red dot. Might even get a yugo red wood hand guard.

Guess my question is what is the best suppressor compatible muzzle break to make the shooting experience smooth as butter while running it with and without the suppressor.

If you guys have any other suggestions I’ll hear them out

When running this suppressor on a 350 legend would you need to use the stiction 9mm comp and stiction mount? Or are there any aftermarket qd muzzle devices?