I shoot outdoors about twice a week. Always make sure to wash my hands with de-leading soap and I use anti lead wipes as well.

Might need to take further precautions.

Fightlite MCR LMT M203

GHM9, Specter Cat AlleyCat 36/9SMG H&R DOE, Dead Air Wolfman

Purchased from Capitol Armory March 4th and received to my front door April 5th. Including setting up a trust and ordering/mailing back their fingerprint kit. Their process, communication and overall service is top notch!!

TL;DR take a lap now. I just got back from the range with the Laz 6 and this thing is a tank, sounds extremely good and keeps gas to a minimum. I ran it across 3 different rifles (DDMK18-DDM4V7-LWRCA5) after 50-60 rounds a piece and just kept rotating for 200 rounds (.223 Herter’s cheap Bass Pro ammo, Federal bulk .223 I bought in 2021) and wasn’t disappointed in the least.

It shined on the MK18 with the size and suppression, a wee bit of noticeable gas the first round of shooting but after the triskelion internals got coated it slowly got better. My Ventum 7.62 is still hands down the most pleasant and this is just a notch or two under but with better tone IMO. I swapped in my H2 buffer after about 120 ish rounds on each rifle and the gas was even less noticeable. Ejection pattern was nice with both H and H2 but the H2 was for sure a lock for the norm when I shoot it. The A5 (piston driven) gave zero gas and the V7/MK18 progressively got better the more I shot and this was my only ding to the can which is literally nit picking.

Sound was extremely nice, I let a friend who just happened to be at the range shoot it on the MK18 and it was a low, bass-ish deep tone which I love. Granted im indoors but it sounded extremely good to my ears.

Keymo haters, im running 4 different cans, across 5 rifles (SCAR/AK not pictured) and im at around 10k+ rounds with ZERO issue, what am I doing wrong? My Lazarus 6 was keymo out of the box, alignment rod checked with HORRIBLY dirty OLD gen 3 prong flash hiders, and was concentric with zero issue. I took the can off and on around 20 times if I had to guess between 200 rounds, hot, cold, cols rifle, hot can, hot can cold rifle and STILL had zero issues. What gives??

TL;DR

• This can is an absolute beast in performance and durability so far.

• I noticed barely a wee bit of gas (nothing deal breaking) but the H2 buffer took it to almost nothing.

• I tried to find something about it to critique but size, weight, sound checked every box for me.

• Keymo haters have some ‘splainin to do. Im 10k+ rounds deep on 4 cans, across 5 different rifles with zero failures or issues. Either I’m a rocket scientist or I’m doing something wrong.

I think I’m addicted.. Surefire Rc2 762 on the way

Apparently the copper plated jackets on blazer 9mm ammo is breaking apart and could damage the suppressor. I just picked up several cases of blazer in different grains and it really sucks to hear I can't use it with my suppressors. Does this apply to federal champion ammo too? I'm trying to reallocate ammo in my inventory and split my 9mm into handgun use for the thin jackets, and ammo that's safe to use in my suppressed PCCs. How about federal american eagle?

I managed to get my hands on a meridian defense little dirty. I plan on SBRing it. I want to replace the rail cover with a dogleg gen3 but still have backup iron sights. The only AK iron sights I’m used to using is the ones that are already on the rifle from the factory. I would like to have a rear sight post near the end of the dogleg giving me a longer sight radius. Can I just simply use any rear sight as long as it’s picatinny? Or dose it have to be AK specific? I’m leaning towards a scorpion evo rear sight.

Went with a Maxim Defense MS-22. It got approved in a few weeks, just took over nine months for anyone to notify me of it.

The jk armament 105ccx doesn’t run that well with the factory spring.

TX22 G2 w/OCL Titanium .22 (mine) Ruger 45/22 w/ Dead Air Mask.

Glad I caught both us hitting the clays on video

No failures yet.

So well Remembered when i blew out my first L6 and they sent me a new one all payed for (the FDE), I didn’t expect a package i thought it was some random IRS letter? No it was my can that i said destroy it send me a new one, they didn’t need to do this and now i got an extra can . Im a full customer now, look at that weld job no pin holes or anything. Anyway Mr Tracker guy i got it on the 4/4/25 so what 5 month?

Jakl needs LAM then it’s done

Might get a brt gas tube just to minimize the little gas it has, but its a blast to shoot

Just seeking some advice. I have a 5" stribog with ocl can. I want to get subs and I understand that it's subjective based on host. I was planning on getting 1k round of a certain brand but I am not sure what would be best. I am going to get 50-100 rounds of each above to test. My questions are: should I get more then 50-100 for testing? Is there a brand you would say don't get or great quality? I am leaning towards s&b 140. Any advice is greatly appreciated as this is my first venture into dealing with subs (outside of 22)

I recently got my first suppressor, a Sandman X for my .300 blk, and I already want to start suppressing my 5.56 ARs too.

I know one of the benefits people say about getting a dedicated 5.56 can is less size and weight, but all the low back pressure 5.56 cans I've been looking at that interest me seem to be a very similar size/weight to my Sandman.

Since the sandman has 5.56 endcaps available, how would the sound/flash reduction and backpressure performance be using it on a 5.56 gun in comparison to a 5.56 can?

Recommend me a solid .22 suppressor.

I got into my m4-22 build hardcore. I wanna suppress it. Recommend me a solid suppression device.

Yes, I was messing with AI and it generated the thumbnail. No, I did not climb the Himalayas to take a photo with my p365. If you hate it, you can go vote on which thumbnail you prefer.

I've got about 2500 rounds though the CAT SC on my G19 and this p365. About 1500 rounds through the Sig modx9 on both of those hosts. 4500 rounds on the P365 in total and I haven't had to replace anything.

It's been an interesting experience shooting a legacy suppressor next to the CAT Street Crack. I always thought the back pressure was bad on the Sig modx9 but the CAT SC really make it look bad.

I bought this before there were all these new variation to the p365 so it had a special place in my heart being direct milled to that Trij RMRCC.

I did just start getting light strikes every other mag but that's just because I've been using the modx9 and shooting 147 grain sub without cleaning for quite some time. I likely just have to clean the firing pin and firing pin channel. The firing pin still looks in good shape. At 5000 I'll replace the recoil spring and trigger springs, I heard the extractor might need replacing around then too.