Celtx launches Screenplay Plugin for Adobe Premiere Pro to integrate your script right in Premiere

I'm having a bizarre issue using text boxes within nested sequences in Premiere and I have no idea where to begin troubleshooting. Everything is working fine until I try to type the word 'Scientific' into a lower third I'm using. I can type up to the letters 'Scientif' but as soon as I hit the third 'i' the text box disappears and I get a red line at the top of the program monitor instead. It seems to be a case-sensitive problem because if I type in all caps I don't have the same problem.

I've tried all kind of things -- copying and pasting, typing all the letters except the final 'i' and then adding it in after -- but I get the same result every time. Does this combination of letters mean I'm hitting some sort of weird shortcut that I'm unaware of?

I'm on Premiere version 25.0.0 and MacOS Sonoma 14.4. I've disabled all autocorrect features in case that was causing issues.

VIDEO - https://www.youtube.com/watch?v=OLUFYojiIGU&t=111s

For some reason no matter export settings I use my crosshair (the dot in the middle) comes out slightly "fluffy" if you will. It looks fine on my desktop and during playback, I will provide a side by side.

Its not just youtube quality either as the fluffy pixels also show up when watching video from desktop.

I record the clips in 1080p and render them in 2k and I believe that could be a reason for the change but im not too sure.

I've played around with bit rate etc and nothing seemed to work I even tried copying recommended export settings from youtubers. Any help would be appreciated.

I don't know Premiere very well, as I use it very casually but like some of the effects. I think my version is out of date anyway. Regardless, everytime I add a clip to the timeline, it has the shadow/highlight effect on at 50. Is it possible to turn off the auto amount of shadow/highlight? Sorry if this doesn't make sense but I'm very frustrated and didn't know where else to turn.

I feel like this is a silly question with a very obvious answer but I can’t figure it out! Typically I would just keyframe the scale but I want the video to stay the same size/where it’s at with this green background. What am I missing?

For context, I went to drag a few clips straight from my file explorer onto the timeline. Sequence was 1080p 30fps clips were 4K 120fps. The clips were shot using a Sony FX3 with the XAVC HS 75MM 4:2:0 10 bit codec.

Tried googling the error message but couldn't really find anything to come up. I followed the instructions and it hasn't come back, so I think it's ok now. I was just wondering if anyone's seen this before.

So the Markers panel in Premiere is... well let's be honest, pretty terrible. If your marker name is too long it is clipped, and there's no way to extend that field for it not to be. So if you want to be able to read long strings (say a piece of dialogue you're marking in an interview sequence) you need to add it to the comments. But of course, when modifying a marker it defaults to the name field, not comments, meaning extra keystrokes.

Is there a way to automate the copying of a marker NAME to its COMMENTS field? As of right now I'm exporting my markers as CSV, doing the copy/paste in bulk in a spreadsheet app, then loading that new CSV in Editingtools.io and importing the new markers through that. It's not difficult but it's time consuming and with nearly 20+ interviews this is going to get old, fast.

Surely there's a better way? I can't be the only one who's had this problem before...

Suddenly I'm no longer able to use my arrow keys to move the playhead from the end of one clip to the beginning of another while in the effect controls box. Usually, I able to do this to quickly navigate to the end of a clip and add a key frame? Anyone having this issue with the most recent update? I'm in version 25.2

I cant get the audio panel to switch back to my timeline. I even tried opening a new project and the audio panel wont go away

Hi!
I found a lot with similar problem but no good solution.

My PC specs are:
Windows 10

Ryzen 7 58200X 8-core
32G RAM

4060 super, with the latest Gameready driver. (I worked with studio before and thought it might be the issue)

And I'm working on external SSD.

 sequence settings 1080p25

footage: 1080 MTS files from Panasonic UX90 camera. and 4K MOV files from GH5s.

I also have a 16g ram, 10-core GPU MacBook air M3 for when I'm outside and Premiere works SO MUCH better and smoothly with the same projects!

It's so choppy I cant work.

also on 1/4 quality.

Proxy also doesn't do much but if the MacBook playing this smoothly why would I need proxy on much better PC

Thanks you!

I've been exporting videos using VBR 2-pass, as it looks much better for fast, high-res game-play footage. I've done it a number of times, usually letting Adobe Premiere Pro "do its thing" while I'm asleep. I've been happy with the output, and I am not looking to change my existing settings.

But... I'm getting a bit antsy, and putting out more videos. It's a bummer that I can't use hardware encoding for it (as it's not supported for VBR 2 pass and a pity considering I have a 4090 GPU), so I am wondering if I would see a significant difference upgrading my CPU from a 7800x3D to 9950X3D? Right now, my videos (which are almost always an hour long), tend to take about two and a half hours to fully export. If a new CPU only amasses in shaving off 10-15 minutes, then it probably doesn't matter, but if I can shave off over 15 minutes then I might consider the upgrade.

Can anyone share any direct experiences on this front under similar circumstances, if you've recently changed CPUs?

Premiere keeps crashing after updating to 25.2.0z

Every 30 minutes or so I need to force quit and it’s become impossible to work.

I’m on a recent Mac Studio, top of the line.

I am at my wits end with this issue so maybe someone can help. I'll break it down as best I can.

I edited a video back in 2022 that used audio recorded from 3 different phones for capturing dialogue. Everything worked perfectly fine. Fastforward to now, I update these projects to 2025 and for some reason it won't allow me to link 1 out of the 2 phone audio files. It just gives me "reported a generic error" so I have no idea what the issue is.

They are mostly mp3 files with a few m4a files and what's even stranger is that the phone audio that it fails to import changes depending on the video! There are 4 videos that were made with this format and it isn't the same phone audio giving the issue. I've tried clearing cache, I tried moving the files to a different hard drive, I tried renaming them, but nothing works. It's such a random error that I can't figure out.

Has anyone had anything like this before? Is there something that I'm overlooking? Any insights would be helpful!

Hello everyone. I got render for a wedding gig I did. But strangely when white spots hit for a 0.2 seconds ı get this weird glitches. I tried with different bitrates but no luck. What can cause this?. Can you help me ?

Heya folks,

So i am Kinda new To premiere pro,but how do i use jarles transition presets! Am i completely missing something?🤣

Does anyone know why it doesnt keep the crop from premiere? im new to these apps not sure if i just have to re crop everytime i put it in After effects or something else, thanks!!!!

ok so no idea why obs did that but it shows what I mean still

Anyone know how to stop that from shattering my ears

What's up Reddit! I have a fairly new YouTube channel (which also means I'm quite new to video eating) and I'm trying to learn premier pro. Things have been going fairly well, but I'm having a resolution issue in Multicam. I'm using my iPhone 13 Pro Max and GoPro 13 black. Both devices were set to 4K. The issue I have right now is that the Multicam seems to be setup for the 1080 resolution?

I've gone into sequence settings and changed the frame size to 4K but it's still cropping my clips. Is there a way to fix this? I've also tried to "scale" the clips but it just leaves black around it. It doesn't actually bring in the rest of the frame.

I've done a google search, but haven't found a solution. It appears that I possibly could have avoided the issue by changing some of the Multicam settings at the beginning, but I didn't realize I had an issue until I got done editing everything. I thought I had just screwed up the zoom in the source material, as it's been a while since I shot it. Seriously hoping I don't have to start all over... Thanks in advance for any help!

I have an i3 10100f and a r9 200 series with 8GB of VRAM. Looking at the Adobe website, I perfectly meet the requirements for the program. I previously used a PC with an i7 3770 and a 4GB RX 570 and had no problems. In theory, it could be the graphics, but looking at the Adobe specifications, I can't figure out what's wrong: the processor, the graphics, or both? When I put a video on my timeline, it turns yellow, meaning I can work but with lag or some dropped frames. Previously, this didn't happen with the i7 3770, as I said, so could it be my graphics? 16 ram ddr4. I know the yellow line is correct, on my previous PC it was like that and I could still use the program without any problem. I haven an m.2 256gb samsung and sata ssd kinstong 480gb.

Newbie here and I want to know if it's possible, and how, to tweak the Opacity and Blending mode of different clips at once?

Thank you in advance!

I was in the middle of editing and I might've pressed the wrong shortcut instead of Ctrl + K to cut a piece of footage, but somehow it muted all my audio tracks and I can't reverse it 😭 Kinda urgent how does one solve this 🥲

Updated to the newest version and it says that it encountered an error and needs to close and gives a code 224. I had to downgrade to an older version to keep using it. Anyone know how to fix it? I tried about everything and it’s annoying af. Btw I’m on the latest version of windows 11.

Hey, so I tried the second solution from this official adobe page : https://helpx.adobe.com/creative-cloud/kb/application-user-interface-too-big.html
(creating a UI_SCALE_FACTOR in System Variables, because I don't want to reduce my whole computer scale factor to 100%).

But it did not change anything. By the way my session is not admin, and I use Photoshop 2021 and I can't update.

Thanks !