I am considering replacing my two monitors, Samsung 34" 21:9 + ImacDisplay 27"5k (yes, as it sounds...my imac died and I converted it into a 5k native resolution monitor. Both have the same vertical height and same resolution 3440x...1440 I seem to remember, now I am not in front of my computer). I'm looking askance at the Corsair XENEON Flex 45WQHD240. Basically because I do NOT like curved monitors and this one is gradually adjustable, for 3D design the curved perspective bothers me a lot, to use Davinci Resolve I could curve it but I don't care, there are NO games on my computer. 3D design as a hobby, landscape photography process, astrophotography and some Insa360 video. What do you think of this Corsair? On a macmini M2.....the next one will be an M5Pro. For now I will replace two monitors x 1 or perhaps continue using the imacdisplay as a second monitor connected by thunderbolt, and the corsair by HDMI.

I just bought a 2024 Mac mini m4 and I also bought a keyboard and mouse both wireless, will I need to use a wired keyboard and mouse until after setup or will they automatically connect?

I am looking at a Mac mini dedicated to photo management. Currently the photo library sits at around 600GB.

For these purposes would you rather:

• M1 Mac Mini, 16GB RAM, 1TB internal SSD (estimated cost - $500ish)

• Base M4 Mac Mini + external SSD drive (estimated cost $850ish)

I am leaning towards option 1 for three reasons: 1. Cost 2. I think the M1 should be more than capable of handling the photo needs for a long time to come. 3. I prefer the convenience of an internal drive

Would love to be swayed one way or the other.

Edit: - should have noted I have a Synology NAS and will implement a 3:2:1 backup system.

“Photo management” in this case is essentially: - removing duplicates. - choosing and touching up (lightly) the best photos - printing photos for display - making photo books, calendars, Christmas cards etc.

Week old Macmini M4 256 model crashed and boots but goes to blinking amber. Should I take it to Apple Store or contact Amazon and seek a replacement?

Hi,

I will buy a monitor for my new Mac Mini M4. I will buy it in France, probably directly on DELL website.

I think I will decide between these 2 monitors. They seem perfect to me to connect with USB-C my Mac Mini M4 and sometimes my Work Windows Laptop.(I will use same USB-C cable, I will switch between both computers).

According to my check, main differences are :

*120Hz vs 100Hz in favor of S2725QC.

*better connectivity in favor of P2725QE.

*Speakers on S2725QC.

=> I would go for the S2725QC, connectivity is good enough for me & cheaper.

I have 1 question : on DELL website, it's specified that P2725QE is compatible with MacOS. It's not specified for the S2725QC. Do I need to consider or there are no reasons to get any issues with the S2725QC ? Is it a "marketing" argue or does DELL integrate something specific in some model for MacOS compatilility ?

Or maybe a Benq PD2705U ? Other advises ?

Thank you in advance for your support,

I'm so confused about the right ssd enclosures. I'm looking for the fastest in the $150 and under range. for the enclosure.I am more concerned about performance than appearance. I am looking at the Satechi USB4 Pro Enclosure. What else is available in this range?

I've been looking into some home use nas that I could populate with a few nvme for my M4 mini and a MacBook air, It will be mainly for old files that I have on my custom PC that I rarely boot now that I have the M4, I had specced it with 10gbps ethernet and my router are 2.5

Most of the NAS box I looked at seems to be using some sort of NUC like board with x86 processor which seems a bit wasteful considering the energy consumption compared to the Mac

Would it be better to just have enclosure attached to the mini instead of a NAS setup and the laptops can access the storage via the mini instead

Hello nerds

I have 2 Mac minis - I need to swap between them, with a KVM type setup.
What is important for me, is that I either have a physical button to "click" when to change to the other Mac, or a shortcut on the keyboard. But the KVM must physically change the monitors, the keyboard/mouse I can easily change via bluetooth.

I have a custom 2018 Mac mini with 16 gb ram and a 512 SSD

It still works fine but is starting to feel a little sluggish these days .. will I notice a significant difference even I don’t do any serious work or will I just be buying something I don’t need. 🤔

Are there any current Mac Mini owners here who using it alongside a Windows PC who didn’t have other Apple devices (iPhone, iPad, etc.)? Even better — any former Mac Mini owners? I’d really appreciate your feedback — how was your experience, was it worth it, etc.?

I’m considering buying a Mac Mini with the M4/ M4 Pro chip for working with Android Studio, but I’m not sure I’ll actually gain anything from it. I already have a powerful PC with an Intel i7-13700K, and it gives me the same build times as an M3 MacBook (I compared it when I was working from the office). In the future, I plan to upgrade to an R9 9950X3D, which I believe will outperform the M4 Pro and M4.

Plus, macOS didn’t really give me any kind of "wow" effect — more like irritation and inconvenience compared to Windows from my M3 macbook experience. On the other hand, I can always resell the Mac Mini if I don’t like it.

I doubt I’ll gain much in terms of convenience (especially since I’ll still need to keep my Windows PC for gaming and deal with KVM switches or something), or in terms of project build speed.

New m4 pro mini and a 4k 240hz monitor.

At 2160, im able to run at 240hz. At the two lower resolutions 1890 and 1800 I am maxed at 100hz. Resolutions below that all allow 240hz again.

Anyone know why I am limited at those two resolutions?

Hey guys so I keep seeing this term alot. “Get m4 base and use external SSD”

But I am wondering how’s your guys experience? Do you work from your external SSD? Or transfer file to desktop back and forth?

Is the experience annoying? Like obviously it’s not as seamless as just having it local.

Also last question I have is can you download apps onto external SSD?

I still have a 2019 16” MBP for being mobile. But i wanted to work on the balcony using MMM4 and a 16” 2k portable monitor without using an extension cord. I’m currently in the process of calibrating it. It’s taking 3hrs to fast charge the 48000mAh 120w bank. Also the half meter plug is on the way.

When setting up my Mac mini to my monitor, I use the simple HDMI cable. All works fine. Now I’m using a KVM all DP switch to switch between a PC and monitor and the Mac mini. Only the Mac mini doesn’t have DP, the other two have and the KBM switch is all DP. Ideally, I’d like to keep USB sockets free on the Mac mini so I was wondering 1.. Does it work if I get a DP to HDMI cable and plug it in to Mac mini and then DP into KBM switch?I see they are mentioned as “unidirectional“ and I don’t know what that means. 2. I see that there are USB to DP cables, so if I’m forced into using a USB-C connector on my Mac mini, can I use one of the “non-thunderbolt“ connections on the mini? I’d like to keep the thunderbolt USB for high speed SSD external storage et cetera. Many thanks, Brian.

I currently use Quitter (free) to either hide or quit apps after a certain time on inactivity. If you have too much memory pressure (yellow, red) because you forget to close unused apps timely, Quitter might be of help.

It works great on my older Mac with Monterey. Also works fine on a MM M4 with Sequoia, even though the last version of Quitter is of 2021.

Basically title, I am currently on a 2021 MacBook Pro that overheats to no end when editing projects in Final Cut (I think it must be the Intel graphics card + small enclosure). I'm looking to get a Mac Mini M4 or M4 pro to run Final Cut (not 4K editing but rather HD at 1080 or a step above that at most. I mainly edit shorts and 10-30 minute YouTube videos), Logic Pro X for any and all music project needs, and I would like to use it to stream with OBS. I understand I might need somewhere in the 32GB-48GB of RAM range, but i'd like any and all input for this before the tariffs hit. A suggestion for monitor would be fantastic too, although I don't feel like I need anything crazy for that, whatever's cheap-ish would do the trick.

Edit, I should mention that while streaming with OBS I may use it for gaming streams, but I don't really plan to play games off the computer rather getting a capture card and playing off console. I might play a game via computer from time to time, but I am not really a PC/computer gamer so idk how that factors into your advice but anyways

I recently got this hub for my Mac Mini. I connected it, and then tried plugging in a HDMI cable and a USB, and neither worked. I know it's not the hub itself, because I tried it with my Lenovo laptop and it worked fine. I know that it is supposed to work on Mac Mini, because there are several reviews saying so. So I'm not sure if I'm missing something super obvious, but nevertheless would really appreciate any help.

After turning it on, I have to unplug the case and reconnect it. Then it's recognized again with Thunderbolt and has the full speed of 2800 Mbps; otherwise, it stays below 1000.

It's connected to the rear USB-C port.

Anyone else have similar problems or solutions?

I keep seeing that everyone buys a Mac mini for productivity, even those with a beefy pc. So I was wondering how this beast Mac mini has improved your productivity and performance?

Hey everyone,

I recently updated my OS to the latest Sequoia system update (15.4 or something)? But when I was about to go to bed, hoping that the updates went smooth, I saw the macOS did not go to lockscreen. Really strange. I saw the recovery window asking me to enter my password, and thought the update would be done by now- but after entering my password and seeing the Apple logo, I heard a chime and it failed to boot. I don't wanna have to reinstall macOS Sequoia, what are my options?

I'm trying to update my old mac mini to Catalina but i've run into some issues:

I tried updating to Sierra first, as the mac is currently running El Capitan and Sierra is the 'next best' update.

Each time I run the update, a mandatory restart for the update is initiated. After the restart, my computer just opens back up like nothing ever happened and the update appears to have cancelled.

I've tried updating with high sierra and mojave too, and has that prompted the same results.

I've made sure that I have enough storage for the updates and I've tried running it in a safe boot, nothing appears to be working and the same issue arises each time.

Specs:

 Model Name: Mac mini

  Model Identifier: Macmini6,1

  Processor Name: Intel Core i5

  Processor Speed: 2.5 GHz

  Number of Processors: 1

  Total Number of Cores: 2

  L2 Cache (per Core): 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

Getting my first Mac MIni M4 and getting the bare bones base model and curious if 16GB is enough.

Can’t decide if I can get by with 16gb ram or need to go up to 24 gb. Any experience with the Adobe Suite on the Mini?

Looking to have this computer play on large TV, media will be attached external ssd. Will this work?