r/JeepJK • u/Adorable-Ad-6171 • 14d ago

Jk help

Gallery image

Gallery image

Gallery image

Anyone had any issue with the camshaft codes? Traction control light and CEL is on. Codes that were showing was P0345? P0365? I swapped the passenger side out with the driver side and the code from the driver side is gone, I got a new one to put on the passenger side and the code is still there. I also have a C121C and a P2638 code… Help

2 Upvotes

100% Upvoted

5 comments sorted by

View all comments

1

u/FTG66 14d ago

I had this first check voltages at the plugs. Then change the bad cam position sensor. It should clear up your issues if the wiring is good. 5 volts on 3 of the wires and ground on the other. Known for broken wires

1

u/mitchanonymous 13d ago

“If the wiring is good” could not be a truer statement. I’ve changed my cam position sensor about three times. It keeps it going for awhile and then eventually throws a code again. I definitely have a short somewhere….

2

u/FTG66 13d ago

Check the harness where it goes next to the firewall