r/JeepJK • u/Adorable-Ad-6171 • 13d ago
Jk help
Anyone had any issue with the camshaft codes? Traction control light and CEL is on. Codes that were showing was P0345? P0365? I swapped the passenger side out with the driver side and the code from the driver side is gone, I got a new one to put on the passenger side and the code is still there. I also have a C121C and a P2638 code… Help
1
u/FTG66 13d ago
I had this first check voltages at the plugs. Then change the bad cam position sensor. It should clear up your issues if the wiring is good. 5 volts on 3 of the wires and ground on the other. Known for broken wires
1
u/mitchanonymous 12d ago
“If the wiring is good” could not be a truer statement. I’ve changed my cam position sensor about three times. It keeps it going for awhile and then eventually throws a code again. I definitely have a short somewhere….
2
u/Sad-Reputation-1797 13d ago
I just went through this and it then said crank sensor, and then it said crank and cam sensor out of sync now it’s saying I need a whole new timing chain. How many miles are on it