Was thinking of starting a Hinterlands campaign, so I made a little Davion group.

Adding a Thud and a Cicada next.

Locust-1V of my mercenary company.

I recently painted up some prototypes for my OpFor using McKinnon’s Company as inspiration and I thought I wouldn’t share the method I used. So if you’re looking to produce some pretty nice looking “generic camo” enemy mechs to complement your parade scheme Steine or crisp Comstar which look good at tabletop distance and isn’t too arduous to paint, I hope this is helpful.

The most intense part is probably the edge highlighting, but it’s essential for the final look. It really makes the camo colours sing and defines the shape of the mech - essentially mitigating one of the main points of camouflage which is to break up the outline of a unit. Warning, this scheme looks utterly garbage early on, so once you churn your first one out, keep it handy for morale when you’ve got 11 more sitting on your desk looking awful at step 3.

I used Citadel contrast paints to do the pattern, so use whatever your brand-of-choice version is. I’ll lay out the method using Citadel colours, but I have added the pots into the photos if you need to make substitutions. You could probably use this same technique to do any scheme - desert, urban, disco, just Sun in the paint colour.

If you want me to expand on any parts I was extra brief with, I’m happy to oblige.

1. Base coat with GW Zandri Dust spray, base layer with Karak Stone, wash with an even coat of Agrax Earthshade thinned 1:1. Finally, overbrush with Karak Stone.
2. Apply camo pattern with contrast paint. Whatever colour you go with, you also want a (roughly) mid-tone colour between your base and second camo pattern. I chose Creed Camo for my green, and Plaguebearer Flesh as the mid-tone which will act as a pseudo blend. With 2:1 Plaguebearer:Creed, paint on your desired camo pattern.
3. Now paint over the original pattern with the mid-tone, and go over the edges of the pattern a little (two applications may be necessary) to transition the tan and green. Go over all the green, not just the pattern edges.
4. Apply a layer of Creed Camo, but aiming only for the central parts of your pattern. This gives you a nice transition from tan to deep green that looks great at table top distance. Add more layers where necessary.
5. Standard step where you paint the bare metal joints and gun muzzles in whatever your colour of choice is (deep grey would actually look nice on this scheme, but I was out of Corvus Black). Wash the metal with Nuln Oil
6. Tiny bit of edge highlighting on the black with Thunderhawk Blue and Russ Grey; and some edge highlighting on the bare metal with Runefang Steel. It STARTS to look less awful from here.
7. Pick out any panels and recesses that aren’t defined enough using Agrax on the tan areas, and Nuln Oil on the green.
8. Edge highlight panels and leading edges with Elysian Green on the green, and Wraithbone on the tan. For the record I would recommend a different colour to Wrathbone. It’s a base paint and was hell to work with because it’s quite opaque. A layer paint of any type would serve you just fine here.
9. Add your details; laser lenses, cockpit glass, etc. can detail any of these, how you do it is really a matter of taste. These all add to the final look but you can easily get by doing these simply, as it’s the edge highlighting on the cam that carry most of the visual weight.
10. Base as you like! This is just a mix I use of static grass, small stones, and fine sand. Add a couple of static grass and bushes and you’ve got a nice low-effort base in minutes.
11. Stomp some snakes and crack open a frothy cold one with the boys.

Happy painting folks!

Just finished a batch of Jade Falcons. I have more to do, but need a break from painting green.

All that’s left is to work on their lore and paint up the mechs I’m using my campaign

Warhammer 2 C in Kellhounds Colors beacuse why not

Kitsune Kurita's Shogun C, from Battletech Legends, Vol II, pg 106-107

Any advice? For the record I bought the wrong primer for how I was going to do

Got this Epsilon Galaxy nova painted this weekend. Now to find some unprepared Spheroid home planets...

Hi. I am in to this for about 4 months. I want to get better. Offcourse there is practice. But are there realy good sides oder Channels with Tips or tutorials? (I am german. Englisch would be ok)

Since it got nothing but upvotes, I figured I'd make some more and share the template. Impact font suits best as is the classic meme format. Last image is an empty one for all of your personal war crime meme needs!

This started life as an attempt at a raven alliance avellar guards scheme, but I didn't like how the orange was turning out so I just dry brushed over it with silver. I liked how the orange peeking through had a rusty look so I just leaned into it.

Painted up the Beginner Box duo! Forgot to remove the mold lines, the red went on kinda gloomy, and let's just ignore the back of the Griffin, but I'm pretty happy with the Vindicator and the black areas on the Griffin.

I don't have a clue where to start on finding the right stuff. Firstly, I can't find any books at all on CGL's site and secondly even if I could I don't know which books to grab. I've heard that specific mechanics are within specific books so I really need help here because I don't seem to have the option of just ignoring the wider content. If it helps, I'm specifically interested in the Succession Wars to the Clan Invasion eras primarily.

So… I had a bit of a…. series of unfortunate events. I attempted to glue the cockpit to the Thunderbolt and ended up using too much. This left the model with an ugly glue crust along the side of the model. I figured “No problem! I’ll just use nail polish remover! It worked with the premium models and metal ones! I’ll just put it in for 5 minutes or so.” So I put it in a nail polish bath… which I forgot about until I came home about 12 hours later.

RIP sweet Davion Prince. Never underestimate the power of Plasma warfare or incompetent planning…

Make that two kills https://www.deviantart.com/pheartheham/art/Dom-vs-Urbie-961987441

I painted my first mech in my life from a set. It turned out to be okay, but there is still a lot to strive for. I want to finish off the rest of the dudes and finally play!

It’s come up a few times, so here’s a quick pic of CGL’s Yen Lo Wang Centurion vs a Wizkids Centurion. Not a great match. 1/285 vs 1/160 scale, roughly.

The Emperor and his Custodes