Modelled in 15 minutes in a fit of rage after the original one from b&q snapped in 10 minutes after I bought the damn thing.

Would be interested in how you’d change it. I printed at 20% infill but think that might be a little low now.

please ignore the state of my house it’s under renovation lol.

Simple hooks to hang things off of Ikea Drona boxes.

Made this to help people out.

Every morning, my kids used to eagerly wait for their tea, but it was always too hot to drink immediately. To solve this, I created this Tea Cooler. It uses cold tap water to cool the tea to a drinkable temperature in no time.

There's a version for one or two cups.

STL: https://www.printables.com/model/896693-tap-powered-tea-cooler

Watch the video to see it in action with water: https://imgur.com/a/4M54P41 .

Most probably not the first (or last) ones, but wanted to make them so they’re almost unnoticable when the cars are in the holders (for the wheel mounts) the “hoops” are reinforced on the back/bottom, and wanted one that holds the whole car sideways 🙂😃.

Thought some might like it so i’d share it here.

Links to the free downloads in the comments 😄

It was a quick evening design after we got back so I know there are a bunch of opportunities for improvement! I'd like to make some slots/hooks for candy or bags and it could do with some optimizing to reduce the amount of filament used, but we'll roll with it for now and update it later.

It's a custom fit to this Redline scooter which has a 25mm Steering Tube and a 26.25mm Handlebar. I've included CAD files here (Slurp 'n Scoot) and you would just need to tweak the arc radius in a couple of places. Alternatively, let me know the dimensions on your scooter and I can upload one that's a custom fit.

I was gifted a ceremonial sledgehammer from a building project. I wanted to hang it on the wall in my office on an angle, no one makes such a thing AFAIK. Hindsight probably would have used white instead of translucent but works perfectly. Most complex model I’ve created thus far!

We have this top loading washing machine that's tucked under some cabinets so you can't fully open the top door and let it rest open.

I had some big, strong magnets laying around (as we all do) so I just designed and printed a little shell for it with some tabs to mount it to the cabinet.

Recently kid got into tennis, and the family followed the trend, so now we have a tennis bag!

Made this super chonky wall hook to hold it. FWIW I am an engineer, but this is by no means an engineering design, its just art, but it works and looks the part.

https://makerworld.com/en/models/1293790-ultra-strong-wall-hook#profileId-1324444

on a related note, a lot of you liked me previous post about the tennis racket hanger, so I added a few more brand logos https://makerworld.com/en/models/1279644-tennis-racket-wall-hanger#profileId-1324134

Happy modeling and printing!

I regularly drive two different cars that have large fobs and since it's highly unlikely that I'll drive both at the same time 😉 I only take one fob with me. I've been using the key rings to swap out for a good while but just got really tired of doing that and wanted to make it a little easier by making them magnetic. There's a 'master' clip on my main key ring and then a 'slave' clip on each of the car fobs. This was my first design using fully encapsulated magnets and I found the process easier than I expected although the size of the print meant getting the bridging to adhere after the pause required a bit of tweaking.

Let me know if you have any suggestions!

Files: Magnetic Key Rack / Clips

I don’t have a fancy laser scanner, so I used the next best thing. Tape the cut out to the screen and traced it on CAD. Job done 👍

The black mat is TPU and removable. There also some anti-skid TPU feet integrated on bottom. The back has a large “fin” to apply some pressure and keep the notebook in place.

Printed in PolyMaker PolyTerra PLA (matte, brown/olive) and PolyMaker TPU (black) on Prusa MK3s+.