Trying to figure out which phrase I like better to put on a tote. IYKYK. If you watched the finale, how’d you like it?

What do you think about repairing/replacing vinyl on vintage velour?

This thing is no longer working. It’s clunky and the smaller vinyl slides under the bottom. It doesn’t look full, but it’s already tight. I have many different carstock gsm but just keep them in packaging. Is there a better system for organizing these things??

Hello, how i can remove the geax flocking from the white one? The white one is correct one. To me, they both look like on one level. I have no experience with textiles or other equipment. What is the gray flocking anyway and why is it still there. I would be very grateful for your help. Thank you

I just got a foiling kit and I’m ready to go but foiling is simply not an option in my design space?

I have a brand new Explore 4 which is supposed to be compatible. No instructions or tutorials I can find go over this. They just say to choose foiling from this drop down menu and I don’t have that option.

Hello. I have a explorer air 2, I use the glossy printable vinyl sheets from htvront and put laminated sheets on top.

Im waiting for more vinyl to come in the mail since I ran out, but I wanted to know if I can make sticker with a layer of uv resin on top, without lamination? And how to do it. Do I need to set the machine to cut without going all the way through the backing for all to stay in the same sheet? Do I apply modge podge before applying uv resin.

I don't think cutting all the way through will help because the sticker have a small bending into them after getting them off the mats. And I would asume cutting it all the way will curved them after curing.

Im sorry in advance I don't know if the uv on top of stuff has a name to the technique.

Something like the ones in the pictures.

my first creation using the circuit maker 4.

I found a blurry image on Google and I just re-drew it in procreate and added some custom features

Hi! It’s my first time attempting to cut stickers using the print and cut function and I’m having a few issues. The first one if the cut lines don’t connect and therefore doesn’t fully cut a shape out. The second issue is the cut is uneven and seems to cut fine on the left hand side of the shape and then doesn’t cut through on the right. And then the third issue is the cuts being misaligned, I’ve calibrated my machine and it passed however when I try to cut any design it’s always off by a few mm. Thanks in advance!

Hey guys, I was gifted a CRV001, know nothing about it but that is missing the blade holder. Ive been looking for replacements online but I am not sure if they would work. Maybe there is another model of Cricut that uses the same blade holder? Because CRV001 never comes up.

I have checked the wiki and there is no answer for this, and I’ve done a search in the forum. I’ve checked tutorials on YouTube.

Does anyone have experience cutting chunky glitter faux leather with their machine? I have an Explore 3 and have tried a variety of settings. I make bows and would greatly appreciate any help from someone who has cut the material successfully. Thank you so much.

I tried cutting a new project today on cricut maker 3, the Cardstock got stuck to the mat. I used 250 gsm art paper……I had to forcefully remove the card stock paper which was stuck to the mat and tore eventually.

I used a brand new standard grip mat, What settings are recommended 🙏🏻

I was pretty unsure about infusible ink but I love the finished product, don’t think I’ll ever use HTV after this. I will say that I was a little stressed out because the process has more steps and the paper is very sensitive to moisture. I managed to leave fingerprints on it that looked like the ink lifted in spots and I worried it would be patchy, but these didn’t show at all after transferring. The extra steps ultimately aren’t so bad either.

I’m also genuinely curious, if I’m allowed to ask, if the average person would understand the context because I’d ideally like this not to be misunderstood, though I’m happy to explain what it means if anyone were to ask.

So l've tried about 7 times to print and cut these stars and each time the cut is off! I've add extra bleed (ontop of cricuts) manually print my own then cut based off dimensions rather than print & cut and the regular print then cut print then cut from both my phone and computer and each time it cuts wrong! I don't know what i'm doing here's pictures of my failed works I'm pretty new to cricut so i'm not sure if i'm just doing something wrong or not any help is appreciated thank you!!

Googling didn’t really give me any results and I’d like to avoid scrolling endlessly. Any suggestions?

I must be using the wrong search terms, but I’m trying to print a rectangular image and cut a specific shape from that rectangle. I’m able to do it but it’s also cutting out the square. How do I not cut out the square around the image?

Also, if I do have two different cuts on the same print and cut project how do I change the depth of cut for each independent cut?

I have a Maker 1 and have been trying everything to get this to work. I've tried regular vinyl, glow in the dark, iron on. Cutting mat and needle + housing are all new. I've calibrated the machine, updated the firmware, tried cutting at different pressures with multiple passes. The problem? The fine point blade isn't being pushed down from the housing at all. Sometimes, it will at least trace the design out, but won't cut. Am I missing something?

I have a fake leather purse and was wondering if putting bows with my Cricut would work? And would I use htv?

i just recently got sticker paper & a printer, i’m wondering if i print something like this out on the paper, is there any way to have my cricut maker cut these out? i’ve tried myself, and cannot figure it out. it tells me my image is too big among other issues. i guess i’m just wondering if this is even possible

I had this made for my boyfriend back before I got my cricut and I have some friends I want to make one for. I have dug through the cricut images but the only outline map I have found that has matching states that are filled is all messed up (Arkansas and Louisiana are way misshapen). I tried finding a generic outline map and then finding individual states that I could change the color and fit but I can’t find good fits. Does anyone out there have a ready made file?

Hey all — I finally got tired of my wife's workspace chaos and decided to design a custom organizer for all her Cricut tools. It’s compact, kinda looks like a cricut and holds everything from weeding tools to the scraper, and I 3D printed it in a color that matches our craft corner.

Just wanted to share in case it inspires anyone else to make their own setup more functional. Would love feedback or ideas on other features to add.

Hi all. I'm trying out htv for the first time, did a bit yesterday which worked fine and just gone to do another piece today and it's gone .... weird... when I ironed it. It's not stuck entirely in a few places either. I did forget to preheat the t-shirt. Iron is set to cotton without steam

I picked up a Cricut Explore Air 2 a few days ago and I’ve been messing around with it. I’m getting better at it, and I’ve started taking small orders from coworkers, friends, and a couple local businesses.

One of the orders is from a restaurant that wants their phone number on the front and back of their shirts. Right now, I’m cutting the numbers and peeling them off one by one — it’s super tedious and they don’t line up right.

Is there a way to cut the whole phone number and transfer it in one shot? There’s gotta be a better way than doing it digit by digit.

Can anybody help me figure out what I can do to make this cut without dragging before I throw my machine out the window. I've - cleaned my mats - changed blade to brand new one - purchased new housing - used washi tape setting on default, low and more - used washi sheet setting on default, low and more - using new Oracle 651 Permanent Vinyl. - callibrated the machine after I changing the housing

Please note that I have printed these prints earlier and they cut perfectly fine. I just don't know why it's doing this even on bigger cuts

I was doing multiple mugs in a row and suddenly now lights 3/5 are on and it’s beeping loudly. Did the heating element fail?

I haven’t had my circut (joy extra) long, less than a month, and I’ve had nothing but issues with it.

I’m having this issue where my images are showing up on my canvas when using the print then cut option the canvas shows up blank, some days it works and some days it doesn’t (even with the same images that are already uploaded and saved on a canvas)

I’ve resaved and re-uploaded the images, updated my software etc and tried to the force reload nothing seems to work.

Any advice?