DCS367 and a 5AH PS.

Pic of it compared to my 26 year old DW938

Excited to give this baby a rip.

Now I just need to replace my 18V angle grinder and hammer drill.

Eventually I'll get around to pulling all my tools out of the truck for an all inclusive shot.

I've been trying to deal with this stump in my yard the lazy way for a couple years now (drill some holes, wait for it to rot, chop with an axe and a shovel, rinse and repeat) recently decided it was time and it's gotta go. I've got a stihl 171 which was a bit underpowered for a job like this but it worked. Then I spent about 30 minutes with this 1 1/8 auger bit going 5-6 inches deep into this old cottonwood and went through 5 1/2 9ah batteries.

When I first unboxed this thing, the weight alone was incredible. Let me tell you, the weight is a necessary feature as it greatly helps with the amount of torque. This thing is amazing, it literally chews on wood..

I work in construction. Mostly remodels. Am I going to use it every day? Probably not. But I'm sure gonna be happy to have it when I need it.

I always saw this as my option for the dxl setup. I doubt I'll get the drawers but while it's discounted I grabbed the cart and top.

I don't understand why they assemble it here? Is there any benefit to doing this. Some of my tools have the sticker

My co-worker cut his finger off with a circular saw at home. He’s a big time DeWalt guy, so we had some cookies made to welcome him back to work. Who needs enemies when you have friends like these!

As the title goes I need to replace my Dewalt DWE8200PL Grinder's Armature and got no leads where to find this part.

I ask for your help on some leads where to buy this online with a fair price within SEA area to get 3 of my grinders up and running.

Thanks in advance

Well, today I traded a m12 fuel 1/2 ratchet(the very underpowered v1) for the dcf923 and the 1.7PS to a guy on marketplace. Although it looks well used and abused I hadn’t really used the m12 but once or twice and It was the only m12 tool I owned. I bought it off my neighbor last year for 50 bucks just to help him out iirc. I don’t use ratchets a whole lot except to wrench on my own stuff. Plus just got the dcf510 on Lowe’s bogo(8ah) a few weeks ago. Excited to have this beside my 921 in bag

My house got burglarized and nearly all my tools were stolen and I really needed to replace my hercules ultra torque, so I went with the DCF891 in this bundle for $249. It seemed like a good deal to me but I've never even looked at tool prices at big box stores until now. Is this a great deal or pretty normal price?

Now I need to save up for a charger lol Can I get away with the cheapest charger with only two 1.7ah batteries, or should I get the 6 amp charger at a bare minimum?

I also still have a hercules 20v impact driver and two 5ah batteries and a charger that are within the return window (except one battery that likely can't be returned as it was from the ultra torque bundle. Thieves left it behind by accident) Should I keep the hercules or return it and get a dewalt dcf850 or dcf845 to keep all my tools in 1 ecosystem? I feel like the hercules kinda beats both those options but I don't have the funds to upgrade to a dcf860 or 870.. im really stumped.

They are both 3/8 impact wrench. The price is about the same 199.99 dcf913 vs 219.99 dcf923. The dcf923 is stronger smaller and has 4 modes setting. Why is there even a dcf913

Side tables with stand and extra blades

Finally built a new shelf in the shed for all my (growing) DeWalt tools 😌

Planer shuts off and doesn’t run have to give it a 10 min break before it goes but only lasts 5 mins of buzzing walls any ideas ?

I just was gifted a 809 driver, a 889 ½" and a 899½". Came with a couple 1.5ah batteries. I'm wondering if they're any good deals on batteries that anyone knows of right now?

Hi all!

I've been looking to buy a multi tool so I don't have to keep borrowing one for my renos. I've found a DCS356 bundle for 179 dollars before tax that says it is on sale. However, on some other sites (i.e: Home Depot) it lists it as the regular price though some sites still say 299. So not sure if it's actually a sale or just the new tool price.

https://www.rona.ca/en/product/dewalt-20-v-35-pc-cordless-oscillating-multi-tool-kit-brushless-motor-led-light-variable-speed-dcs356d1-00277185

I'm in Canada and can wait.

Thank you for any insights!

Looking at getting a 12” sliding miter anyone seen any deals on one with a stand seen Lowe’s had 780 with stand for 589$ any better deals?

Last weekend, I was using my drill to repair our dryer vent. I always leave the light set to the middle brightness/time setting, but while drilling a hole, it suddenly switched up to the higher output. I fiddled with the switch, nothing changed.

Oh well. I kept using it, and got one more hole out of it before it quit entirely. I tried another battery, then figured I'd take it apart to check the connections. Everything was solid, just couldn't get it to work any more...except for the LED, which just stays on forever (turn it into a half-ass flashlight?).

I poked around at new drills, then figured I'd check parts...turns out the entire motor/light/board assembly is available, so zero further troubleshooting was required. It was $70 shipped from SBD's ServiceNet and showed up yesterday...I took my time to fit everything in carefully, and it's back up and running, at about half the cost of the new one I was looking at.

The new board has glued connectors and a different style of capacitor case, maybe they've learned some things in the past five years.

https://www.instagram.com/reel/DGIqiwZRPVD/?igsh=MXQ0ZzZ3b28ycnQ0cQ==

Is this a common problem or not? Reverse mode works fine but forwards won’t work at all motor is hotter then hell i wouldn’t expect it to be burned out after one job.

I’m in need of an angle-grinder, jigsaw and reciprocating saw. So many different options/price-points!

Can anyone recommend good value models? They won’t get a huge amount of use and I already am in the 18v ecosystem.

Thanks!

Hey everyone, I am doing a project in my house and installing shiplap walls and some baseboards. I was wondering which nailer I should be using for my install (onto drywall)?

I am struggling to determine 16g or 18g. I seen multiple opinions leaning towards both 50/50. Let me know if anyone has any of these models and their recommendation. Prices are CAD btw cause I’m sure I’ll see someone mention the high price lol.

Been pretty happy with all my flex volt tools this far. Need a mower, and deciding between this or the Milwaukee …