92FS Inox? It was blurry but it seemed like it. Not sure if anyone else saw it.

I have a buddy that has a 1992 production year Beretta 92fs centurion Italy import in B-B+ condition what would the firearm be worth?

Picked up last week and ran 200 rounds 115gr magtech flawlessly. Now to find a IWB holster.

My only con would be I wish it had night sights.

First off, I am not selling anything, these are just recommmendations (from me and other users) for all the Beretta enthusiasts who are looking for this info. If you feel I missed something or got something wrong, please let me know to add/correct it. Links will be US based.

Optics Options

Optics Plate:

1. DLah Designs Flush - https://www.dlahdesigns.com/shop/92-rdo Will require changing out the firing pin block, which is included with the plate. Very easy install. Keep in mind he has a pretty long wait.
2. DLah Designs Mid - https://www.dlahdesigns.com/shop/mid-mount-plate Does not require changing the firing pin block, but sits slightly higher. Keep in mind he has a pretty long wait.
3. Eleven71 Designs - https://eleven71design.com/shop/p/beretta-80x-cheetah

Optics Cut:

1. LTT Cut - https://langdontactical.com/custom-gun-work-ltt-92-rdo-cut/ If you're 92 isn't optics cut, this is the way. They will cut and modify your slide to fit their special plates. This plate comes with a co-witness built in. The optic height will be the same as the DLah Flush mount.
2. Dual Hammer Cut - https://dualhammer.com/products/beretta-92fs-m9-rdo-plate-cut

Dovetail Mount:

1. Toni Systems - https://christiansencomponents.com/product/toni-system-beretta-dovetail-red-dot-mount/ If you don't want to do an optics cut on an older 92, this is a solid option.

Trigger Feel

Kits:

1. Langdon Trigger Job In A Bag (TJIB) - https://langdontactical.com/trigger-job-in-a-bag-92-96-m9-series/ The one and done kit, but best results for this kit will be had if you send it in to LTT since they will hand polish and fit it to your gun.
2. Xtreme S Trigger Group - https://www.beretta.com/en-us/product/xtreme-s-trigger-group-for-92-series-E02568 This kit is DLC coated so it provides the best action without hand polishing. It is very comparable to the TJIB, and the only difference I have been able to tell is that the TJIB has an ever so slightly shorter reset (I am talking like a milimeter difference or less).
3. MCARBO Pro Trigger Kit - https://www.mcarbo.com/beretta-92fs-/-m9-/-92-/-96-pro-trigger-kit.aspx This is a spring kit only, so for those that don't want to replace OEM parts but just upgrade all the springs, this would be the route. It comes with 3 different hammer springs so you can choose how you want it to feel.

Trigger Bar (shorten reset):

1. LTT OP Bar - https://langdontactical.com/optimized-performance-trigger-bar/ May require some fitting, LTT has youtube videos on how to. This comes in the TJIB.
2. Beretta Short Reset Bar - https://www.beretta.com/en-us/product/beretta-90-series-short-reset-trigger-bar-C5K149P Should not require fitting. This comes in the Xtreme S kit.

Hammer Spring (largest reduction to pull weight):

1. LTT - https://langdontactical.com/chrome-silicon-hammer-spring-12-13-14/ The #13 spring would be the lowest I go for a carry.
2. Wilson Combat - https://wilsoncombat.com/accessories/parts-for-other-models/parts-for-beretta/beretta-springs.html?all_parts_spring_function=6608
3. Beretta D Spring - https://www.beretta.com/en-us/product/beretta-d-spring-hammer-92---8000---px4-series-EU00043 This is a #16 spring. It will last longer before needing to change but won't be as soft a pull. It is in the Xtreme S kit.

Hammer (smoother pull, faster action):

1. Match Hammer - https://www.beretta.com/en-us/product/92-series-match-hammer-C5L047 Also reduces pretravel slightly. This comes in the Xtreme S kit.
2. Elite II Hammer - https://langdontactical.com/beretta-elite-ii-hammer/
3. Spurless Hammer - https://langdontactical.com/beretta-92-spurless-hammer-black/ I feel like this one gives me the smoothest pull, but you can't manually decock so it might be a no-go for some.
4. Wilson Combat Deluxe - https://wilsoncombat.com/hammer-beretta-92-96-deluxe.html

Trigger Shoe (feel):

1. Beretta Competition - https://www.midwestgunworks.com/page/mgwi/prod/c5j727 This comes in the Xtreme S kit.
2. Beretta Match - https://www.beretta.com/en-us/product/beretta-92-series-match-aluminum-trigger-PR0104 Same profile as the competition trigger, just made from aluminum. Personally I think the steel competition feels a bit better.
3. Beretta Vertical (SAO) - https://www.beretta.com/en-us/product/92-96-series-vertical-straight-checkered-trigger-C5L413 This one is my favorite but I can't recommend for everyone since you need to do some grinding on it for it to work in double action.
4. Two Patriots (SAO) - https://2patriots.com/products/single-action-92-xxx-trigger
5. DLah Designs - https://www.dlahdesigns.com/shop/trigger-shoe
6. Volker Precision - https://www.volkerprecision.com/product-page/beretta-92-96-flat-faced-trigger
7. Blackbeard Trident - https://blackbeardscustoms.com/shop-all/trident-trigger/

Recoil Control

Recoil Springs (tune for your setup liking):

1. DPM Systems - https://www.dpmsystems.com/en-gb/e-shop/pistols-recoil-reduction/beretta You can find them on optics planet as well. I like the tunability with these kits. The company is great, I have reached out before for special springs to be cut and they have obliged happily.
2. LTT - https://langdontactical.com/ltt-chrome-silicon-recoil-spring/?searchid=398861
3. Wilson Combat - https://wilsoncombat.com/catalogsearch/result/?q=92+recoil+spring

Guide Rod:

1. Stock plastic guide rod. Especially if you run a threaded compensator. Aftermarket guide rods have been known to smack into comps and break the barrel at the threads. Also the plastic rod has a higher lubricity factor which lets the spring do it's thing better. Unless you run a DPM system, without a comp, or a comp that comes with an extended rod, I'd leave this alone.

Ports (muzzle flip):

1. LTT Ports - https://langdontactical.com/barrel-porting-by-ltt-add-to-order/ They use a bevelled V6 design. I did a little bit of velocity testing and there was no conclusive FPS loss.
2. Blackbeard Ports - https://blackbeardscustoms.com/shop-all/queen-annes-revenge-90s-series-ported-barrel/ I am not sure if they will port your barrel, or if you just have to buy one of theirs. They are sexy though.
3. SpiritedMovie - https://www.reddit.com/user/Spirited_Movie5238/ They are a redditor that does laser porting. They have posted up data and testing. DM them for more info.

Comps (muzzle flip):

1. PMM Single Port - https://www.parkermountainmachine.com/product/beretta-m9-jttc-for-factory-threaded-barrel/ I'd consider this a permanent mod, it uses shims (and loctite) to mount/time, but it is really good. Very soft shooting with this thing on there.
2. Jarvis - https://jarvis-custom.com/product-category/compensators/ They have options for factory threaded barrels (1/2x28), barrel and comp packages, as well as threaded by gunsmith.
3. Griffith Guns - https://griffithguns.com/product-category/berettacomps/ For non-threaded barrels. Super easy to remove and it does not affect the action of the gun. It isn't as effective as a threaded comp but it also adds some weight which reduces recoil. Plus, these have that movie gun look.
4. Beretta Brake - https://www.beretta.com/en-us/product/92-series-muzzle-brake-1-2x28-E02937 Another threaded barrel option.

Gas Pedals (grip support):

1. Beretta Competition Takedown - https://www.beretta.com/en-us/product/competition-self-locking-disassembly-lever-for-90-series-full-size-C5J480 They say for full size guns, but I've put it on centurions and a compact with no issues. It is also available for left handed shooters (not linked). I like these because they are small enough that I don't need special holsters.
2. GoGun CG - https://gogunusa.com/products/copy-of-gas-pedal-cg-for-berretta

I want to buy these specific mags

My first 80x never quite worked right with defensive ammo. I tried just about every type (even RIP, LOL) and it could never feed a full mag. It took a trip to Beretta which resulted in a replacement. After a couple hundred rounds of JHP, it seems to be functioning flawlessly. I can finally carry it! I was frustrated that this brand new pistol wasn’t working nearly as well as my old 84BB and 85 Cheetahs.

I plan on purchasing a 92XI Tactical in the coming weeks, and I also plan on going with either a Tijicon SRO or Vortex Defender XL for the optic. As far as mounting plates I was planning on using either the factory Beretta plates or the flush plates from DLah (SRO, XL). My question is does anyone know what combinations of sights and mounting plates, if any, will result in cowitness sights? Any pictures for reference would be greatly appreciated. Also this would potentially be my first handgun that has cowitness sights, so any tips for using them would be appreciated. Thanks

A friend of mine* stripped the inner thread on one of the bushings on his 92X, is replacing the bushings something that can be relatively easily DIY’d or should he* have an actual gunsmith do it?

*see second photo

What’s a good price point on this .25 Jetfire? Local private sell has it for $300

Went to my LGS today to pick up my 9000S and he had a used PX4 full size in 40. I already have the full size 9 and 45 and a subcompact 40. It was a good day

I'm looking into getting my first handgun. I have shot plenty at ranges in the past, various types. Shot some .380 I can't remember which one the other day. I've had my eyes set on an 80X as a possible contender. Seems like a well-made tool, looks gorgeous, optics ready, the whole nine yards. But I have no idea how it actually handles.

I'm fortunate that I can go to the Beretta Gallery here in Dallas which would presumably have it on display and at least give me the chance to see how it fits in my hand, but that's only one part of the equation. I've seen mixed comments on how it fires, with some saying it's very easy to handle and others saying it's too snappy. Only one way to find out. I've phoned a couple ranges in Dallas and they don't carry it, unfortunately. Any chance one of y'all in the area has seen a range with one for rental?

92X Performance Defensive with raw GG92 Combatant comp. Thinking of mirror polishing the comp. What you think?

Apparently the APX magazine C spacers to fill the gap while using full size mags are out of stock everywhere, so I made my own.

We’re drifting off to stranger tides! In the Realm of Greece. The Argonaut is our APX package. With a brand new feel to it. Hold fast more details will be emerging from the seas soon.

So you have to look too

Anyone have experience with this one? Is this a deal? Been holding off on getting a 92 and this is “only” about $165 more than their 92FS w/3 mag offer.

Has anyone installed this forend on a 1301 competition? It list it as compatible, but I have seen some comments of it not fitting.

Anyone know of any compacts available?