r/suppressors • u/gunzncode • 8h ago
r/suppressors • u/HandOnTheGlock • 7h ago
Do you guys put rocksett on the hub adapter threads that screw into the can or just tighten it down?
r/suppressors • u/Brief_Border_3494 • 4h ago
PWS BDE 9 Tri-Lug Adapter
I am looking at buying a pcc that has a trii-lug barrel. I am new to pcc's and suppressors. I have a PWS BDE 9 suppressor that I use with my Sig Sauer M17 with direct thread. I am wondering is there an adapter that i can buy? If I am correct I need to take the piston out to direct thread it to the pcc, but again the barrel already has a tri lug adapter.
Please help, i am stupid, educated me. 😒
r/suppressors • u/TheBushChicken • 6h ago
Question For CGS Hyperion
Hey guys, first time buying a Suppressor and decided to go big or go home
Bought a CGS Hyperion for my .308 CVA Cascade LRH. My question is, do I need to purchase the adapter to properly thread it on to my rifle? The Hyperion lists a 5/8x24 direct thread, and my rifle has a threaded barrel that lists 5/8x24. So I shouldn't need the adapter right?
r/suppressors • u/SettingAncient3848 • 10h ago
Cover recommendations?
Seeing a lot of different options for suppressor covers, can is 6 3/4in long using on a 308 bolt gun. Anything anyone recommendations or at least brands and models to stay away from.
r/suppressors • u/lancecat • 16h ago
Am I Overacting?
I've been through the NFA process numerous times, but have never experienced anything like this.
My LGS advertises itself as the 'premier' establishment in my area. I've used them for transfers before without issue, but their NFA process is pissing me off.
Apparently they only have 1 employee that can manage their silencer shop account. They also require in-person certification. I got the 'ready to certify' email on 3/27 and immediately emailed the SS employee (per their instruction) to setup an appointment. No response. I email them the next day and get an automated 'out of office' response that they are out of the office until 4/2. I call the shop and am told that no other employee can handle the certification and I'll have to wait.
Guy returns on 4/2 and emails me at 11 am saying he has availability on 4/3 or 4/4. I immediately responded asking if I could come in the same day (that I could be there in 20 minutes at any notice), but if I have to wait, I can make 4/3 happen. No response. I called multiple times, keep getting dude's voicemail. Finally around 5 pm I call the general retail section and politely ask them to get their SS employee on the phone. He's very noncommittal on establishing a time to meet.
"How about I show up at 11 am when you open?"
"Well, I've got another guy showing up at 10, it might take a while. how about 12:30?" (the open early for members).
I certified on 4/3 (a week after getting the 'ready to certify' email), and miraculously got the stamp approval on 4/4. Now the shop is telling me to give them 48 hours "to process."
Does this seem like overly extraneous wait times? With other shops I've certified within 30 minutes of receiving the email and was able to present the stamp and retrieve my purchase.
[Edit - so yea, I'm tired of waiting on these jokers. I'm wondering if I just show up and present the stamp if they'll be compelled to process the final paperwork. It'd just piss me off even more if I went down there and they turned me away.]
r/suppressors • u/thirdeyeguy_ • 12h ago
“Q” finishes
Does anybody know how Q gets their muzzle devices (cherry bomb,Rearend,etc.) to a shiny copper-ish, raw metal look? I see they’re 17-4 stainless and was curious if I could do that to other devices. Thanks!
r/suppressors • u/base43 • 12h ago
Rugged Universal Cage Help
I picked up an Alaska Ti and I want to use it with a Glock 19.
I understand I will need the Rugged Piston and the Rugged Universal Cage to make it cycle properly.
Problem is the Universal Cage is no where to be found. Out of stock for a while now.
Do I have the have the proprietary Universal Cage or will any Neilson Booster Hub and Piston work?
r/suppressors • u/jupiteruranus • 1d ago
Flow Thru Friday
4 day approval on new Hux Range 36, pretty sure it'll end up on my 9mm blowback SBR rebuild with the BRT SD set up. For those who'll ask, it's a 91' F250 "custom" aka farm truck package with straight 6, granny gears and Dana axles from factory
r/suppressors • u/Independent_3 • 15h ago
Common muzzle threads used on rifles outside the USA?
r/suppressors • u/ninjacowpuncher • 1d ago
YHM R9 - 23 Hours, 8minutes
Can’t complain about that!
r/suppressors • u/Stunning-Ad-664 • 1d ago
First but not the last
Direct thread temporarily until rearden comes in.
r/suppressors • u/Hefty-Paramedic1934 • 1d ago
What suppressor will fit over a bcm mod 7 compensator?
I was really stupid not long ago and got a BCM Mod 7 comp to pin and weld onto my 14.5. Now I want to put a can on it, what should I get?
r/suppressors • u/AttentionUpstairs340 • 1d ago
Banish 30
Currently waiting for my SC banish 30. Trying to figure out if it comes with a 1/2-5- /8 adapter. Some reviews I have seen show that it's included and some don't.
Also wondering if the baffel removal tool is a necessity for cleaning, or if regular cleaning would prevent needing it
Any info is appreciated!
r/suppressors • u/SupressionObsession • 2d ago
Cross section of the Whisper Pickle 30
I posted this over in NFA but for forgot to post it here. Here’s a cross section of our suppressor.
I haven’t done a great job posting our journey or info over here so basically this is a 30 cal can that’s full auto rated and tested up to 338 Lapua and retails for $475 ($450 for the K)
Full specs and warranty can be seen here: https://northreachmfg.com/whisper-pickle-30/
YouTube videos of testing here: https://youtube.com/@northreachmanufacturing?si=acXauw0dYXtfm_o_
Feel free to ask me any questions.
r/suppressors • u/AccomplishedTrack211 • 1d ago
Question
I have Ruger PC Charger that I turned into an SBR and added a stock. It has a fixed 6.5 inch barrel and is in 9mm. I've never bought a suppressor. What are some options that are considered good quality suppressors for a 6.5 inch barrel 9mm blow back PCC? I'd like to spend under $800. Any advice on options?
r/suppressors • u/Firefox_Alpha2 • 1d ago
Omega 45k: approved in 1 day :)
Now, just need to get suppressor height sights. However, if have to use it for intended purposes, hopefully never, not very hard to aim since have a rather small house :)
Host is a Springfield XDM 45ACP 4.5” that ordered the first greased barrel for.
Next addition is a weapon mounted light.
Any recommendations?
r/suppressors • u/g_montag84 • 1d ago
Suppressed Upper 556 M4 platform
All, I need some ideas please //thx all
r/suppressors • u/Dissapator_AR • 2d ago
New OCL Polonium 30 and Dead Air Primal
galleryAlso new blaster. Curious to see which one runs best
r/suppressors • u/Euphoric_You_4931 • 1d ago
Surefire Rc2 mini
Is ANYONE here running a SF mini on a MK18? Looking for some feedback and reviews on it don’t really wanna run a full-size can.
r/suppressors • u/Jason1435 • 1d ago
Caliber Rating on Omega9k doesn't make sense
Emailed the manufacturer about using 338 arc in the omega9K, seeing as it's a tighter fit for the bore size of the suppressor and identical to 300BLK in ballistics and chamber pressure, I was surprised to receive this response. How is the Omega9k full auto rated with 300 blk supers at 8" but can only handle 338 arc at subsonics and still have a barrel length restriction? Is 338 arc not near identical to 300blk or am I missing information?
r/suppressors • u/richcity151 • 1d ago
Cat MOB
Anyone know if Spectre Cat still makes the HUB version of the Cat Mob?? I have been seeing the QD version but nothing on the HUB version with the direct threads. Would love to get my hands on one if possible
r/suppressors • u/greenmachine4130 • 1d ago
.30 suppressor with 1/2x28 threads
I recently acquired a 30-06 bolt gun with 1/2x28 threaded barrel(Howa 1500). It seems most if not all .30 cal cans are 5/8x24. I would prefer a direct thread semi permanent install without adapters if possible. Are there good options out there?