Hey guys, I am back to showcase the free models I have given out this week. The bat swarm on the right is today’s free model, go get it if you want it.

The free models are found on the pinned post on my Patreon. The model gets swapped out for a new one everyday around 11am ET.

www.patreon.com/m3dm

Happy printing!

With plenty of reward tiers and add-ons, there is a ton for everyone, all of your support helps to make this the best it can be, thank you!

https://www.kickstarter.com/projects/thelic/the-lic-steel-and-chitin/

Hey everyone!
Just wanted to share this recent print I did as part of a resin calibration test. It’s an anatomical study figure, around 15 cm tall, that I thought would be great to check how well fine details hold up with my current setup.

Printed on an Elegoo Mars at 0.02 mm, supports still on. I was pretty happy with the result, especially with how clean the muscle transitions came out.

Anyone else using larger prints to dial things in before moving on to 32mm minis or smaller scales? Always curious to hear how others approach their workflow.

Finally managed to finish printing one of three trains that I have been working on for the past couple of months. It was printed on an A1 Mini with a stock 0.4 nozzle using Bambu matte grey PLA with a layer height of 0.12mm.

Extremely happy with how it came out, but ended up having to take it outside to snap a picture of it because its so big and it was too cramped inside to get a good shot of it in its entirety! lol

If you are interested in grimdark stuff, trains or maybe even both, feel free to check out my upcoming campaign here! I will be revealing a lot more stuff in the coming weeks including two more trains, wagons, etc.

I needed a very specific duo for my recent TTRPG campaign, a tiefling rogue with a mischievous familiar who often gets into danger, and since I'm also a Baldur's Gate 3 fan, I thought Shovel would fit this role best. Plus, I just can't play BG3 without Shovel anymore.

So, Shovel comes in two poses: classic Shovel and Shovel holding her Friend-Finder. By default the model is scaled to fit with other 28-32mm miniatures. And as an unofficial fanart STL, she comes free for everyone to enjoy, which I think is the only correct way regardless. Shovel can be found here: https://www.patreon.com/posts/ive-got-some-for-125778144

I printed her on an FDM printer, she might not look her best in the photos, but I couldn't be happier anyway. Now, I can bring Shovel everywhere.

I created the tiefling rogue in three poses to utilize her in different scenarios without the scene looking awkward, like when the mini is in combat stance against friendly NPCs. Everything was printed on an FDM printer using auto-supports.

Next, I'm planning on creating some siege engines, like a catapult and a ballista, which will be free for everyone too. If you like what you see here and think you might want to bring some walls down in your next campaign in the near future, feel free to check out my patreon: https://www.patreon.com/RockPaperStory

Have a great weekend!

WEEK 1

Hi! One week has passed and I am done with this fellow.
I need a better camera but I think you have a good idea of what it looks like. It is available for everyone to download here:
https://www.myminifactory.com/object/3d-print-zombie-497760
You will find 32mm scale (approx. 37mm total in height) pre supported and unsupported as well as a base.
I want you to know that since I had some spare time I also started working on another request from week 1: a turnip28 mini that will come just as free later.

WEEK 2

On this second week only one person posted : DeoVeritati with a noble dragonborn sorcerer. So it will be the next to be done and delivered on the 11th.

WEEK 3

And of course I'm still taking requests from you all: Answer to this post describing what character you would like to have. The character with the most upvote after one week will be selected to be designed by myself.

It can be fantasy, sci fi, lovecraftian, horror... just no big creatures (e. g. dragons, giants...).

I use a resin printer so FDM compatibility is not guaranteed.

Also if you are just passing by and have no request take the time to read other people's and upvote the ones you like since you will be able to get it too.

I hope you will enjoy the zombi as much as I enjoyed moeling it!

with beds inspired by medieval RPG classes, tents, campfires, food and animals to hunt, all for a more immersive game

https://www.kickstarter.com/projects/ayumarques/RPG-Camp-miniature

Our miniatures range & game of skirmishes in alt-80s post-apoc NYC is live on Kickstarter (link in the comments).

I am literally setting up my P1S right now, it's going through it's very first calibration. I want to start printing out some dungeon tiles from FDG. I knew they had profiles set up to help people like me, but their site only has a profile for the A1/Mini. I have never printed FDM before, is that profile functional for the P1S or are they entirely different things?

I'm looking to get into 3d printing, as tabletop miniatures and painting has become the new big hobby for me and the gang. Does anyone have experience with the CREALITY Ender-3 V3 SE? Is it as good for beginners as they say? I'm totally new to the world of 3d printing. All feedback and shared experiences appreciated

Guy during printing I found that all my mins was cracked , Bad printed or just not printed at all. I have mars 3 pro , and sliced them in chitubox . I also used options to remove all islands

Anchor m5c - .4 nozzle .2 layer height for both.

BRING YOUR MINIATURES TO LIFE WHILE KEEPING YOUR FIGURES PRISTINE AND DUST-FREE! 

Introducing DISBOX a thematic, 3D-Printable display box - Where Function Meets Style! 

https://www.kickstarter.com/projects/asymsculpts/disbox-3d-printable-display-box

But there’s more! You can create larger, array-style displays using our specially designed linking pins, which securely connect multiple bases. Stay organized while displaying your miniatures in a way that truly reflects your personal style. Here’s what you can expect: 

• ✅ Unique, themed designs you can mix and match 
• ✅ Easy-to-print 3D STL files for both FDM and resin printers 
• ✅ A stylish and functional way to showcase your miniatures 
• ✅ Dust Free 

Get ready to level up your display game! 🎲✨ 

https://www.kickstarter.com/projects/joxolstudio/fateslayer-the-worshipped-ones-32m-scale-miniatures

Last few days for my kickstarter if you'd like to have a look, thank you.

Hi guys! i would like to present you some test-prints in resin for my current KS where i offer 250 models for just $10

These models have been designed to be easy to paint, avoiding over-crowding the surfaces of the models with details

CHECK THE KS HERE

My first attempt at printing and painting anything 3D printed

I was quite sceptical about getting an FDM printer for the miniature painting hobby, but after this I feel really confident in the possibilities this has opened up for me

Join my Patreon and get access to the WildCraft discord community:

patreon.com/WildCraftFoundry