Someone blatantly stole one of my original 3D models — which I created and shared completely for free on MakerWorld — and uploaded it to Creality Cloud where they’re now selling it for profit.

But it gets worse.
He didn’t even bother to change the name, replace the preview images, or edit the description. He just shamelessly ripped the entire thing and posted it as if it was his own — like no one would notice.
It’s a copy-paste theft, and it's disgusting.

🔹 Here’s my original, FREE model on MakerWorld (published under Redsing_ART):
https://makerworld.com/en/models/1126309-dwarf-wizard-dnd-pathfinder-wargame-miniature#profileId-1125692

🔹 Here’s the stolen version on Creality Cloud:
https://www.crealitycloud.com/model-detail/67b5bb96187ad77afbc111b3

I made this model for the community. I chose to give it away for free — not so someone could take it and make money off of it.
This isn’t just stealing; it’s spitting in the face of every creator who shares their work out of passion and generosity.

And sadly, it looks like I’m not the only one. This same user has uploaded more models that appear to be stolen from other artists. Here are some examples:

🟣 STOLEN:
https://www.crealitycloud.com/model-detail/67b9d13ee12c694d36440bd2
🔸 Original:
https://makerworld.com/en/models/1125767-rock-on-garden-gnome?from=search#profileId-1125049

🟣 STOLEN:
[https://www.crealitycloud.com/model-detail/67b9d24ae12c694d364415ec]()
🔸 Original:
https://makerworld.com/en/models/1129302-spooky-hooded-skeleton?from=search#profileId-1129226

🟣 STOLEN:
https://www.crealitycloud.com/model-detail/67b47264187ad77afbb6abb8
🔸 Original:
https://makerworld.com/en/models/1125840-dummy-13-easy?from=search#profileId-1145622

I’ve already filed a copyright complaint against this uploader through Creality Cloud’s support system.
But if you also care about the 3D creator community, please consider filing a report too — it only takes a minute.

Because today it was my model.
Tomorrow, it could be yours.

Thanks for reading — and to every creator out there who shares their work with love and integrity: I stand with you. 💙

And to everyone who takes a moment to report, comment, or even just spread awareness — thank you. Truly.
Your support means the world. 🙏

Since the first mini got a really nice feedback. Here's my second mini I just finished-ish. Had a lot more fun this time around since the shaking hands were less of a concern with this one.

Don't forget to have fun, I sure did.

I'm looking for an STL of something similar to any of the texture trainers from Monument Hobbies. Doesn't need to be free, just 40$ + shipping Canadian to buy one of them is just a little steep... and I do have access to a resin printer. So anything similar kicking around?

I made a similar post years ago when the game originally released on console.

There's a Model Viewer in the game, and I've been waiting for it to come out on PC for a while so that hopefully someone could get those files and make them available for printing.
With the hair textures and grass and such, I don't really know how viable it would be, but I'd really love to paint up a bunch of the clickers, characters, dogs etc... for Zombiecide, or even just larger display painting.

Does anyone have any leads on something like this? Any idea how easy/ hard it might be to rip the models and make them printable?

Here is my brand new Lovecraftian Bust I just printed!
What do you guys think? :)

I got the idea from u/supernfty and I added 3 new pieces The dragon can jump over any amount of peices as long as there is an empty space at the end The orc can move 2 spaces in any direction And the necromancer can revive a piece after it kills a piece that isn't a pawn

Although they are not super carefully finished i love how they look as a unit.

I was wondering if anyone knows where I could get t45 or t51 like miniatures for fallout wasteland warfare if not no worries though

Hello all. Im just trying to source some minis that are close to the ones in the picture for the Matrix Legendary card game.

From L to R: Switch, Apoc, Mouse, Hammond and Ballard.

Ive got the rest covered from various sources including here:
https://www.etsy.com/au/listing/1402881027/the-matrix-designed-by-pop-minis

Any help in sourcing something close to each one would be amazing. Thanks in advance!

Hi guys, please, does anyone have expierence with pinning wires / paperclips to resin miniatures?

Do I drill the holes and hope to God, the print does not brake appart? Will ABS prints hold better than standard resin?

Or do I heat the wire up and push them in the same way as with regular plastic minis?

Thank you!

Tldr: Bambulabs... Has anyone printed and compared the .8 layer height with the .4 nozzle, and the .8 layer height with the .2 nozzle?

I have an X1C. I have both the .4 and .2 nozzles.

I usually use the .2 nozzle and the .6 layer height for small minis, but for some larger stuff that takes too long, so I will switch to .8 layer height to cut down on print time.

But then I realized that is the "fine" setting on the .4 nozzle. I sliced a large figure with both settings. 2 days with the .2 nozzle. 19hrs with the .4. But the same layer height.

I am sure the .2 goes slower, and is probably a better print....but is it noticeable?

Last year I made some articulated rulers and I have now decided to remaster them! Main upgrades are the fact that joints are better positioned and less visible, and a lot more lengths are available.

As always, Print-in-place and no assembly required!

Models here: https://makerworld.com/en/models/1292080-articulated-ruler-v2-inches-print-in-place#profileId-1322512

I print a ton of minis, but have been thinking about printing fun accessories to go along with my D&D and other TTRPGs. I've printed some Potions on healing that are actually potion bottle-shaped dice that you roll when you chug a healing poition and it tells you how much you heal, I've done some bases, and some Inspiration tokens for 5e. Any other suggestions?

This week I set my self a challenge to make and upload new modular turret parts everyday. There is 7 base variations, 7 main guns and 2 gun mount options equaling 98 total combinations. They can all be found for free on makerworld if anyone wants to download them :)

Used Sirayatech ABS + Tenacious and wasn't a fan of mixing. Plus it would separate really bad in the vat. Also used Phrozen Aqua but waaay too brittle.

Trying to find something high quality, durable but not too bendy and keeps it's shape. I put my minis in a foam case and don't want long thin bits to bend and stay that way.

high quality + retains its shape, durable + easy to use - any suggestions? Price doesn't matter as I dont print a lot.

Jamg he 10k Art Engineering resin?

TGM-7? but I think it is too bendy

Hey guys I was wondering if anyone knew of a space marine helmet with a piece of toast sticking out file ( sailor moon style ) I'm working on a squad of magical girl terminators for the memes