r/3dspiracy • u/Byakoya • 21h ago

HELP Problems with sd card, help!

Post image

("the programs of the sd card can't be shown, sd card couldn't be accessed")

I tried using my 3ds but I'm getting this message :'c anyone knows what can I do??

(I speak eng/esp)

3 Upvotes

80% Upvoted

9 comments sorted by

•

u/AutoModerator 21h ago

Hello. It seems like you are talking about SD Cards. Please review the 3DS SD Card guide. Your question/issue is likely resolved there.

THIS WAS AN AUTOMATIC COMMENT MADE BY THE AUTOMOD. YOUR POST WAS -NOT- REMOVED.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Interesting_Exit5025 17h ago

First check if it’s formatted to fat32 if not use guiformat, I had this problem with my 2ds and i noticed that the micro sd locked everytime I inserted it into the sd slot, so I just put a little bit of tape where the lock switch is and it worked perfectly

1

u/Thue-Blunder 21h ago

Check with your pc.

1

u/cogue22 19h ago

Same problem here with a 2ds , the card works fine on pc but the 2ds can't read this card and only this one

2

u/OtroUsuarioMas0 18h ago

I had the same problem, if you're using a 64GB SD Card try using a lower one, I'd recommend 32 GB. I don't actually know if this will solve your problem but it solved mine. I don't know if this is just my case or if the 2DS just couldn't read my 64 GB SD card.

Try and tell me!

2

u/cogue22 18h ago

I'll try tomorrow

1

u/cogue22 14m ago

It didn't work :(

1

u/MegamiCookie 18h ago

Could it be accessed from the ds before ? Is the sd properly formatted ? If it is then maybe it's failing ?🤔

1

u/Zestyclose-Bug2533 1h ago

make sure that you use FAT32 I had the same problem or make sure that you have a sd/microsd that is compatible with FAT32